Description
- Smart LED pendant lamp fabric shade lighting dining room app Google Home Alexa
- DESIGN: High-quality pendant light for the living room.
- LAMPS: 4x 5 watt smart LED lamps | color changer | Mobile App | Alexa & Google Home
- MATERIAL: frame: metal | Shade: fabric
- DIMENSIONS: length wooden beam x total height in cm: 85x150
EUR 64.90
Incl. VAT,
excl.
Shipping
Free shipping from 100 EUR
5 EUR Newsletter Voucher
Purchase on account and instalments
In 1-3 working days at your home
Description
This modern pendant luminaire from the Padme range is not just decorative, but also flexible. The textile lampshades in different sizes can be arranged as desired. The cables of the lampshades are wrapped around the wooden beam at different heights and can be adjusted as required.
The pendant lamp above the table cuts a particularly good figure in the living room, dining room or kitchen.
Compared to normal lights, LED spotlights consume a minimal amount of electricity and are even lower in consumption than energy-saving lights.
Thanks to the included light source, you can operate the lamp comfortably from the couch using the app or voice control. You can use the app to set the timer with different days of the week and times, as well as different lighting programs.
A high-quality, energy-saving RGB LED light source is included.
Thanks to the included light source, you can operate the lamp comfortably from the couch using the app or voice control. You can use the app to set the timer with different days of the week and times, as well as different lighting programs.
A high-quality, energy-saving RGB LED light source is included.
Details lamp
• lamp type: pendant lamp
• material: metal, nickel matt, wood grey div>
• lampshades: textile, gray
• protection class IP20
• diameter x height lampshades small: 16 x 14 cm div>
• diameter x height lampshades large: 22 x 20 cm
• length of wooden beams: 85 cm
• total height: 150 cm
• sockets: 4x E27
• bulbs included: yes
• power bulbs: 4x 5 watts div >
• bulbs included: yes
• power bulbs: 4x 5 watts div >
• luminous flux: 4x 470 lumens
• light color: warm white to cool white + RGB color mode
• power supply: 220 to 240 volts, 50 to 60 Hz div> Details Light source
• power supply: 220 to 240 volts, 50 to 60 Hz div>
• Light source type: RGB-LED Smart-Home
• Socket: E27
• Energy consumption: 10 watts
• light color: warm white to cold white + RGB color mode
• material: metal, silver, plastic
• protection class: IP20
• luminous flux: 806 lm ( Lumen)
• Energy consumption: 10 kWh / 1000h
• Color temperature: 2700-6400 K (Kelvin)
• Light color: warm white to cool white + RGB color mode
• Ra > 80
• Energy savings: 80%
• nominal power consumption: 10 W (watt)
• nominal service life: 30,000 h (hours)
• switching cycles: 15,000x
• operating voltage: 220-240 V (volt)
• Mains frequency: 50 Hz (Hertz)
• Mercury content: 0 mg (milligrams)
• Compared to normal lightbulbs: 10W - 60W
• Ambient temperature: -20 ° C to + 40 ° C
• dimmable: yes
• use with sensor / timer possible: yes
• nominal half-value angle: 200 ° (degrees)
• diameter x height in: 6 x 12
• start-up time up to 100%: < 1 sec. (Seconds)
• Socket: E27
• Energy consumption: 10 watts
• light color: warm white to cold white + RGB color mode
• material: metal, silver, plastic
• protection class: IP20
• luminous flux: 806 lm ( Lumen)
• Energy consumption: 10 kWh / 1000h
• Color temperature: 2700-6400 K (Kelvin)
• Light color: warm white to cool white + RGB color mode
• Ra > 80
• Energy savings: 80%
• nominal power consumption: 10 W (watt)
• nominal service life: 30,000 h (hours)
• switching cycles: 15,000x
• operating voltage: 220-240 V (volt)
• Mains frequency: 50 Hz (Hertz)
• Mercury content: 0 mg (milligrams)
• Compared to normal lightbulbs: 10W - 60W
• Ambient temperature: -20 ° C to + 40 ° C
• dimmable: yes
• use with sensor / timer possible: yes
• nominal half-value angle: 200 ° (degrees)
• diameter x height in: 6 x 12
• start-up time up to 100%: < 1 sec. (Seconds)
S can be expensive via app (smartphone, tablet, etc.)
• compatible app: Smart Life
• suitable operating systems: IOS, Android
• voice control via Google Home and Amazon Alexa div>
• suitable operating systems: IOS, Android
• voice control via Google Home and Amazon Alexa div>
• white light control: warm white, neutral white, cold white
• RGB color mode: selection of 16 million colors
• memory function (last setting is adopted)
• timer (various Days and times programmable)
• different scene modes adjustable
• RGB color mode: selection of 16 million colors
• memory function (last setting is adopted)
• timer (various Days and times programmable)
• different scene modes adjustable
Attention! The installation can only be carried out on the WiFi frequency 2.4GHz, for this it may be necessary to deactivate the WiFi frequency 5GHz for the duration of the installation, via the router.
Similar articles
Shipping
Payment
paymentCategoryId: 725
Accepted payment methods
PayPal | |
Debit | |
Credit card | |
Purchase on account | |
Sofort (Bank transfer) | |
PayPal Express | |
Amazon Pay | |
Hire-Purchase by easyCredit | |
Cash on pickup | |
Bank transfer Volksbank RheinAhrEifel eG IBAN Nr. DE17 5776 1591 0600 1418 00 Swift Code GENO DE D1 BNA | |
Payment by invoice (via Klarna) | |
Payment via instalment purchase (via Klarna) |
Disposal instructions
Product datasheet
Login
You are already a customer?
Not a customer yet?
You can access your orders and customer data at any time in your personal "My account" area. As a guest, you can order without registering. For further orders you will have to enter your data again.
Register